GE EWS2 Guía de instalación Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
STORAGE
6
Prior to installation, units should NOT be stored
outside in corrugated boxes (cardboard boxes) alone.
Until installation, all units should be placed in a
covered dry storage area. The storage area should
not exceed -40°C (-40°F) to 50°C (122°F).
- This can be preferably in a roofed area or with a
tarp that is secured in such a way to keep water
o of the corrugated boxes (cardboard boxes).
MAINTENANCE / CLEANING
5
To maintain high eciency of the lens, occasional
cleaning of the outer lens surface may be needed,
with frequency dependant on local conditions.
Use a mild soap or detergent, which is essentially
neutral pH (pH approximately 6 to 8), non abrasive,
and which contains no chlorinated or aromatic
hydrocarbons.
Wash thoroughly, using a soft cloth.
Rinse with clean, cold water and wipe dry.
WARNING
Risk of electric shock. Make certain power is o before
attempting any maintenance.
GE_GEH6014A_AreaLighting_LED_Evolve_EWS1_Installation_FINAL_EngFreSpaPort_091113.indd 3 9/11/2013 9:37:16 AM
Vista de pagina 2
1 2 3 4 5 6 7 8 ... 15 16

Comentarios a estos manuales

Sin comentarios