GE EL Series Guía de instalación descargar pdf (Pagina 3)

Luminaire Installation

3 4

Wear work gloves to prevent dirt and oil

from being transferred to the luminaire.

Take out driver box from packaging. Pull open front cover

by disconnecting the clips on two end caps.

Disconnect clips with screwdriver

Connect wires from driver box to the wire leads in outlet

box using wire nuts (white to white, black to black, green

to green). Connect the dimming wires if needed.

Optional dimmer: When connecting dimming controller,

wires must be run through a separate knockout hole

equipped with bushing provided.

Risk of damage: Make sure that supply connection,

light xture wiring, and dimming cables are connected

to proper driver inputs. Wrong connection may cause

damage to the product.

Hold the Light Engine and move to suspension cable.

Connect two adjustable nuts to studs on top of the

luminaire.

Before connecting exible cord to the output wires of the

driver, form a knot in the end of the cord to act as a strain

relief. Be sure the knot is inside the enclosure. Install wire

clamp to top surface of the driver box and then connect

the red (line) and black (neutral) wires from light engine to

red (line) and blue (neutral) wires from the power supply.

Green wire to G position on driver box.

Align the driver box with the 2”x4” outlet box. Then

mount the driver box to ceiling with 3 fasteners capable

of supporting >30 lbs. each. The outlet box should be

aligned with the driver box allowing no exposed gaps to

outlet box. WARNING: Use fasteners (not supplied) that

are appropriate for use with your mounting surface

and weight of the xture.

Unpack Light Engine from packaging. Properly inspect

for defects before installing. Make sure the Light Engine

is only carried out by holding two ends of it. Do not

touch Light Guide when taking out.

Front cover

Wire clamp

Flexible cord

Outlet box in ceiling

Dimming line

(optional)

AC line

Fastener Fastener Fastener

Ceiling

2”x4” outlet box

Adjustable nut

Surface mount driver box

1 2 3 4

Comentarios a estos manuales

Sin comentarios

GE EL Series Guía de instalación Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para No GE EL Series