GE ABV1 Guía de instalación descargar pdf (Pagina 3)

3 4

Loosen screws to remove power access plate.

Connect AC line to xture’s power supply using the

supplied UL listed wire connectors. Green to green

(ground), red to red (line) and black to black (neutral).

If supplied with a factory installed cable connect

green to green (ground), red to black (line) and black

to white (neutral).

Place all connections and exposed wire inside of xture

and reattach power access plate.

A) Install 1/2” conduit, or B) install AC power cord with

strain relief into power access plate.

A) Conduit B) Power cord

Electrical Connections (347/480V)

Optional Mounting Methods

1 2

Determine rod spacing based on the above table.

Secure 1/2” threaded rods into structural members

in ceiling. Place a nut on each threaded rod where

xture should hang. Slide rod mount brackets onto

threaded rods and tighten second nut onto rods to

secure xture.

Lift xture up to installed rod mount brackets until they

snap onto mounting features. Let the xture hang and

install (4) 8-32 x 3/8” screws into rod mount brackets.

Do not over tighten screws.

Rod Mount Kit

OPTION A

Attach to

structural member

Fasten with nuts

ABV1-series LED Modules Rod Mount Spacing (in.)

1 ≤ 11.5”

2 ≤ 26.5”

A) Conduit B) Power cord

1 2 3 4

Sin comentarios

GE ABV1 Guía de instalación Pagina 3