GE TPK6 Manual de instalación descargar pdf (Pagina 2)

INSTALL THE TRIM KIT

Loosely reinstall the handle using the five

screws previously removed.

Lay the consumer-supplied panel on top

of the door and slide the panel up under

the handle, making sure it is centered

from side to side.

Peel off the paper strip from the top

section of the plastic frame, exposing

the adhesive tape.

Position the top of the frame over the top

of the door. Check to make sure the top of

the frame is positioned so that it slightly

overlaps the handle. Press down firmly.

4

3

2

1

PREPARE REFRIGERATOR FOR

TRIM KIT

Carefully lay the refrigerator on its back as

shown. Make sure the refrigerator door is

clean and dry to ensure proper adhesion

of the tape on the trim kit frame.

Remove the screws and leveling leg

attaching the bottom hinge to the

refrigerator.

Open the door and pull the door away

from the top hinge.

Lay the door on a flat surface facing up.

Remove the handle by removing the five

screws.

5

4

3

2

1

2

Panel centered

on door side to

side as shown

Screws

1 2 3

Comentarios a estos manuales

Sin comentarios